GEPRC CineLog 35 V2 3.5″ w/ Walksnail Avatar – 6S HD Cinewhoop

About this product
The CineLog 35 V2 features a Walksnail Avatar VTX, main carbon plate, and injection protection frame with an increased 7075 aluminum column for structural strengthening. The battery mounting uses a tie with 7075 aluminum parts fixed, and the power XT60E1-M plug is integrated with the carbon plate for convenient application. The protective frame adds a memory card and USB port for easy data reading. Equipped with F722-45A AIO and the new SPEEDX2 2105.5 motor, this drone has more power with an aggressive system and faster response. This is a 3.5-inch HD FPV cinematic FPV drone that integrates cinematic, freestyle, leisure, and safety to meet the user’s requirements for flying and filming various scenes indoors and outdoors.

Note: Action camera is not included.

Features
The Walksnail Avatar camera is designed with an independent under-hanging shock absorption gimbal
Strengthened carbon plate, hollow design, injection protection frame, and noise reduction design
Propeller Guard adds memory card and USB ports for easy data reading
GEP F722-45A AIO V2 high-performance flight controller
SPEEDX2 2105.5 motors with HQ DT90 propellers
Carefully tuned 3.5-inch HD cinematic FPV drone
7075 aluminum parts are fixed, solid and stable
XT60E1-M Power Cable
Specifications
Receiver: PNP, GEPRC ELRS 2.4G, TBS Nano RX
Motor: SPEEDX2 2105.5-2150KV（6S）
OSD: Betaflight OSD w/AT7456E chip
FC system: GEP-F722-45A AIO V2
CineLog35 V2 HD weight: 285.8g
Model: Cinelog35 V2 HD Avatar
Camera: Avatar HD Camera V2
Propeller: HQProp D-T90MM
MCU: STM32F722RET6
Flight time: 5′00″ -8′ 30″
VTX: Walksnail Avatar
Bottom plate: 1.5mm
Gimbal plate: 2.0mm
Antenna: 5.8G&2.4G
Frame: GEP-CL35 V2
Wheelbase: 142mm
Gyro: ICM 42688-P
Top plate: 3.5mm
ESC: 8Bit 45A
GPS: None
Recommended (Not Included)
XT-60 Batteries: 1050mah-1300mah
Includes
1x GEPRC CineLog 35 V2 3.5″ HD Cinewhoop Drone w/ Walksnail Avatar – 6S (Choose Receiver)
1x L-shaped screwdriver (1.5mm)
1x Naked GoPro Mounting Base
1x L-shaped screwdriver (2mm)
1x L-shaped screwdriver (3mm)
2x HQProp D-T90MM（2 pairs）
2x M20*250mm battery strap
1x Antenna fixed tube (pair)
1x Antenna Mounting Base
1x GoPro Mounting Base
2x Battery Silicone Pads
1x Plastic Tweezers
1x Hardware Set
1x M5 wrench
1x Keychain