This Cinewhoop Carbon Frame Kit is for the Shen Drones Squirt V2.1 3″ ducted quad. The Squirt is a peppy flyer that can carry a Hero!
The Squirt started as a special project for Robert McIntosh, Godfather of slow super proximity cinematic flying. Thanks to improvements to the Hero and content from great pilots like Nurk, it became part of a new movement dubbed Cinewhooping by Nurk.
The Squirt was originally conceived to fly slow and stable, but it got pushed way beyond its original intent in the hands of great pilots. The standoffs in the main body are an anchor point. Added to the one at the far corner, that’s three anchor points per duct. And instead of having an M3 at the anchor points, the duct will slip over 20mm standoffs at the outer points and a 30mm standoff within the main body. Allowing the duct to maintain its original round shape.
Here are some build tips from Andy Shen of ShenDrones!
Note: Frame and Hardware Only. Ducts, 3D Printed Parts, GoPro, Battery, Propellers, and Electronics NOT included.
Features
- New baseplate with a cross brace that provides an anchor point.
- The battery is centered instead of counterweighting the Hero.
- Reduced yaw moment for better performance.
VIDEO: Does your Squirt Fly Like This?
Specifications
- Size: 3″ Frame Kit
- Material: Carbon Fiber
Note: The receiver type slightly alters the frame to accommodate said receiver. DJI FPV versions have 40mm tall green standoffs and include a holder for the air unit and its antennae.
Recommended Parts (Not Included)
- HQ 4×4.3×3 props cut down to 3″ have performed best. (You want a bullnose tip that hugs the ducts. Keep the gap at a minimum for maximum efficiency)
- 1407-1507 3200-3600kv Motors
- 20×20 Stack (or 36×36)
- 4-in-1 ESC
Includes
Squirt V2.1 Kit (Carbon and Hardware Only)
- 1x Bottom (Main) Plate
- 1x Hardware Kit
- 1x Top Plate
Note: Frame and Hardware Only. Ducts, 3D Printed Parts, GoPro, Battery, Propellers, and Electronics NOT included.
There are no reviews yet.