TBS Source One V5 5″ Frame Kit

The TBS Source One V5 5″ Frame Kit is a wide-stance, X configuration frame, and popular frame kit for freestyle or free-range acrobatic flying!  It is built to withstand harsh crashes and abuse. It fits and protects all the classic FPV components and is optimized for lightweight. The Source One is a perfect everyday workhorse for casual FPV flying and competitive freestyle.

ABOUT THE PROJECT

The Source One project is a first-of-its-kind collaborative FPV frame project initiated by Team BlackSheep. The frame is donated to the community to empower creators and makers to integrate best practices and current trends into a continuously manufactured product. In return, TBS is allowing the local FPV community and distribution networks to have access to a cheap but good frame to help them compete in an increasingly predatory marketplace!

GET INVOLVED!

• Project discussion: https://discordapp.com/invite/ZJGkHwF
• Project files: https://github.com/tbs-trappy/source_one (Coming Soon)
• Interactive Manual (work in progress)
• 3D Printed files on Thingiverse: https://www.thingiverse.com/tag:sourceone (Coming Soon)
• 3D Printed Parts (STL) are also available on GitHub! (Coming Soon)

•  Wheelbase 5″: 226
• Top Plate: 2mm
• Middle Plate: 2mm
• Bottom Plate: 2.5mm
• Arms Spacer: 6mm
• Camera plate: 2mm
• Standoff height: 30 and 22mm
• Arm thickness 5″: 6mm
• Stack Mounting: 30.5 × 30.5mm & 20 x 20
• Weight 5″: *123.5g

The recommended items were put together by TBS engineers and pilots. TBS strives for reliability and high quality in all of their selections, which may cost a bit extra but it allows you to enjoy the frame much more!

BUDGET BUILD (~$230)

• FC: Airbot F4 Fireworks V2, or HGLRC Titan 60A FC AIO
• ESC: 4x Flycolor Raptor 30A BlHeli-S
• Motors: 4x MasterPilot 2750kV or MasterPilot PRO 2750kV
• Camera: TBS Oblivion Camera
• VTx: TBS Unify Pro RACE or TBS Unify Pro HV SMA 800mW
• Antenna: TBS Linear Whip or TBS Triumph SMA
• Props: HQ V1S Props or Gemfan Hulkie or Gemfan Flash

TBS POWERCUBE BUILD (~$300)

• FC, ESC, VTx, OSD: TBS PowerCube FPVision 2in1
• Motors: 4x MasterPilot 2750kV or MasterPilot PRO 2750kV
• Camera: TBS Oblivion Camera
• Antenna: TBS Linear Whip or TBS Triumph SMA
• Props: HQ V1S Props or Gemfan Hulkie or Gemfan Flash

PRO FREESTYLE BUILD (~$350)

• FC: BrainFPV Radix & PDB
• ESC: 4x TBS BulletProof DSHOT600 25A ESC
• Motors: 4x ETHIX Mr.Steele SILK V2 2345kV Motor
• Camera: RunCam Swift 2
• VTX: TBS Unify Pro HV 800mW
• Antenna: TBS Linear Whip or TBS Triumph SMA
• Props: HQ V1S 5×4.5×3

• 1x Frame (Top, Middle, and Bottom. Brace and 2x Camera plate, 4x Arms, 1x arms spacer)
  1x Screw & Standoff set
• Hardware:

-16X M3x10 Allen screw
-4X M3x12 Allen screw
-4X M3x14 Allen screw
-4X OD 5mm M3 30mm standoff
-4X OD 5mm M3 22mm standoff
-8x M3 press insert nut