, ,

Flywoo BNF Firefly DC16 Nano Baby HD V2.0 1S 1.6″ Deadcat Micro Quad w/ Walksnail Avatar Mini 1S Lite & Avatar Lite Cam – ELRS 2.4 GHz

Availability:

Available on backorder


Experience superior performance with the Flywoo BNF Firefly DC16 Nano Baby HD V2.0 1S Deadcat Analog Micro Quad. Boasting a 30% power increase compared to its predecessor, it offers extended flight time while providing an incredibly stable flight experience. It comes with a new and improved canopy design for increased camera protection and a crash-resistant bottom plate for added durability. Enjoy the unmatched experience of this incredibly crafted drone from Flywoo. Experience the elite capabilities of HD Walksnail System.

$320.00

Available on backorder

Experience superior performance with the Flywoo BNF Firefly DC16 Nano Baby HD V2.0 1S Deadcat Analog Micro Quad. Boasting a 30% power increase compared to its predecessor, it offers extended flight time while providing an incredibly stable flight experience. It comes with a new and improved canopy design for increased camera protection and a crash-resistant bottom plate for added durability. Enjoy the unmatched experience of this incredibly crafted drone from Flywoo. Experience the elite capabilities of HD Walksnail System.

Features

  • Redesigned canopy with enhanced aesthetics and reinforced camera protection.
  • The bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter.
  • Equipped with ROBO 1002 19800KV motor and 1608 3-bladed 40mm propellers, delivering a 30% increase in power, reduced noise, and enhanced flight stability.
  • The GOKU Versatile F411 ELRS 1S AIO V2 boasts an ELRS 2.4G receiver, expertly connected via UART 2 instead of SPI for superior performance.
  • A30 plug supports a continuous current of 15A, providing greater power and longer flight times compared to the PH2.0 connector.
  • New battery compartment design allows for easy replacement of batteries of different models.

 

Dead Cat Style

The drone boasts a dead cat design that enhances stability, extends battery life and provides an unobstructed flying experience with hidden propellers.

web 1 1 Robotonbd

New Design

Redesigned canopy with enhanced aesthetics and reinforced camera protection.
Bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter.
web 2 5 Robotonbd

Efficient Power Combo

Equipped with ROBO 1002 19800KV motor and 1608 3-bladed 40mm propellers, delivering a 30% increase in power, reduced noise, and enhanced flight stability.DC A 2 Robotonbd

Ultra-light AIO with ELRS 2.4G RX

The drone’s GOKU Versatile F411 ELRS 1S AIO V2 boasts an ELRS 2.4G receiver, expertly connected via UART 2 instead of SPI for superior performance. This allows for the ultimate lightweight design without sacrificing functionality.web 3 Robotonbd

HD Digital VTX System

The Walksnail Avatar HD Mini 1S Lite is a lightweight VTX designed for 1S whoop drones, featuring H.265 high-efficiency video coding technology, 1080P/60FPS image recording with 22ms ultra-low latency, and built-in 8 GB storage for interference-free HD video recording and USB exporting. web 4 1 Robotonbd

More Power, More Flight Time

The A30 plug can sustain a continuous current of 15A, whereas the PH2.0 connector can only support 4.5A. Given the same capacity, the A30 plug can release more current, providing greater power and, as a result, longer flight times even when flying at full speed. DC A 5 Robotonbd

Specifications

  • Frame Kit: Firefly 1S DC16 Nano baby quad Frame kit
  • Motor: ROBO 1002 19800KV
  • Electronic: GOKU Versatile F411 ELRS 1S 5A AIO V2.0
  • Propeller: 1608-3 Blade 40mm 1.5mm Shaft
  • Camera: Avatar Lite Cam
  • Weight: 33g

GOKU Versatile F411 ELRS 1S 5A AIO V2.0
Flight Controller

  • MCU: STM32F411CEU6
  • GYRO: ICM42688
  • UARTS: 1/2
  • Soft serial port: 1
  • I2C: SCL/SDA
  • BEC: 5V
  • Input Voltage: 1S (<4.35v)
  • Firmware: FLYWOOF411_5IN1_AIO 
  • Mounting:  25x25mm, M2

Onboard 4in1 ESC

  • MCU: EFM8BB21
  • Power supply: 1S LiPo/LiPo HVCurrent: 5A
  • Firmware: BLHeli_S
  • Factory firmware: O_H_5_REV16_8.HEX
  • Default protocol: DSHOT 150/300/600
  • ELRS 2.4G RX (UART2)

ROBO 1002 19800KV

  • Configuration: 9N12P
  • Stator Diamter: 10mm
  • Stator Length: 2mm
  • Shaft Diameter: 1.5mm
  • Motor Dimension(Dia.xLen): Φ13.5×7.75mm
  • Weight(g): 2.5(5cm wire)
  • Idle current(5)@5V(A): 1.3
  • No.of Cells(Lipo): 1S
  • Max Continuous Power(W)3S: 44
  • Internal Resistance: 89mΩ
  • Max Current(3S): 11.8A
  • Max Efficiency Current: (2-4A)>84%

Walksnail Avatar HD Mini 1S Lite

  • Model: Avatar mini 1s module
  • Communication Frequency: 5.725-5.850GHz
  • Transmitter Power (EIRP): FCC:<25.5dBm;CE:<14dBm;SRRC:<20dBm;
  • MIC:<25dBm
  • I/O Interface: JST1.0x6(Power in)JST1.0x4(USB)
  • Mounting Holes: 25.5×25.5mm
  • Dimensions: 30x30x6.5mm
  • Storage: 8G
  • Recording: 1080p/720p
  • Weight: 5.1g
  • Operating Temperature: -20-40℃
  • Channels: 8
  • Wide Power Input: 3.1V-5V
  • Supported FC System: Betaflight
  • OSD: Canvas mode
  • Bitrate: 25mbps, 50mbps
  • Latency Average delay: 22ms
  • Antenna: IPEX

Avatar lite camera

  • Model: Avatar lite camera
  • Image Sensor: 1/2.7”1nch
  • Resolution: 1080P/60fps,720P/120fps,720P/60fps
  • Ratio: 16/9 4/3
  • Lens:2.1mm
  • FOV:170°
  • Aperture:F2.0
  • Shutter Rolling: Rolling shutter
  • Min.Illumination: 0.001Lux
  • Weight: 1.8g
  • Dimensions: 14x14x16mm

Includes

  • 1x Flywoo BNF Firefly DC16 Nano Baby V2.0 HD 1S 1.6″ Deadcat Micro Quad w/ Walksnail Avatar Mini 1S Lite & Avatar Lite Cam – ELRS 2.4 GHz
  • 4x 1608 -3 40mm 1.5mm shaft
  • 2x TPU battery mount
  • 1x hardware screws set
  • 4x Prop guards

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

https://www.videosprofitnetwork.com/watch.xml?key=972bc8431ece8d626bbd06739eda737a